三河マルシェ【MARCHE】三河エリアのコミュニティポータルサイト

The REVOLEX® pin & bush coupling made of steel is suitable for a circumferential speed up to 60 m/s. As an example, directly driven industrial fans require high speeds in addition to high performance.
Standard shaft-hub-connections are feather key connections. In addition the hub material steel enables oil press fits as well as combinations with CLAMPEX internal clamping sets and external clamping sets.Get more news about Elastic Pin Coupling Wholesaler,you can vist our website!

The REVOLEX made of steel can be realised with customized special dimensions, we are free to define diameter and length.
Furthermore there is the option to use special steels. As an example, pin & bush couplings made of high-strength steel like 42CrMo4 or steel with special noth impact strength for low temperature applications (oil rigs, arctic belt drives) have been implemented. In addition steels with 3.1 + 3.2 acc. to DIN EN 10204 for maritime applications have been realised which are used, for example, in bow thrusters (thrusters) of large cruise liners.
The REVOLEX® KX-D pin & bush coupling made of steel is available from stock in sizes 75 to 330 as a pilot bored version, special dimensions in diameter and length are available.

Due to the gap between the elastic sleeve and the circular hole on the flange of the coupling half and the deformation coupling of the elastic sleeve, the two relative offset and shock absorbing performance are compensated. It is suitable for transmission environment with high speed, good rigidity of the installation base, high centering accuracy, small impact load and low vibration damping requirements. Working temperature -20~+70°C.